WGB220 Light Grader Blade (with Height‑Adjustable Wheel)

The WGB220 Light Grader Blade is a versatile rear‑mounted implement designed for land leveling, gravel road maintenance, trench backfilling, and snow clearing. Equipped with a height‑adjustable 12″ (300 mm) gauge wheel, this grader blade significantly reduces drag on the tractor and improves stability during grading, allowing for a smoother, more consistent finish, especially on loose or uneven ground. The mouldboard (scraper plate) can be manually swivelled to either side within a ±60° range (total 120°), enabling the operator to angle the blade for efficient material pushing, side casting, or ditch cleaning without leaving the tractor seat. With a rugged all‑steel construction, total weight of 155 kg, and overall dimensions of 2200×1600×1400 mm, the WGB220 is perfectly suited for 30–50 HP tractors equipped with a Category 1 or 2 three‑point hitch. Whether you need to maintain a long farm driveway, level a field after ploughing, clean out drainage ditches, or push snow in winter, the WGB220 is a lightweight yet tough tool that will save you hours of manual labour.

Available model: WGB220 (2200 mm overall length, 1600 mm overall width, 1400 mm overall height).

◆ Product Features

• ±60° swivelling mouldboard
  The mouldboard (scraper plate) swivels ±60° from centre for a total range of 120° – angle the blade to the left or right to direct material exactly where you want it.
  Use for levelling, side‑casting, ditching, or backfilling – all from the tractor seat.

• Height‑adjustable 12″ gauge wheel
  12″ (300 mm) pneumatic wheel with manual height adjustment.
  The wheel supports part of the implement’s weight, reducing draft load on the tractor for easier towing and a smoother finish.
  Adjustable height allows the operator to set the working depth precisely.

• Optimised size for 30–50 HP tractors
  Overall dimensions: 2200 × 1600 × 1400 mm (length × width × height).
  Weight: 155 kg – light enough for smaller tractors but heavy enough for effective grading.

• All‑steel welded construction
  Heavy‑duty steel frame and mouldboard.
  Designed to withstand the rigours of farm use, including rocks, gravel, and compacted soil.

• Replaceable and reversible cutting edge
  The bolt‑on cutting edge is made of wear‑resistant steel and can be reversed when one side wears out, then replaced when fully used – prolongs the life of the main mouldboard.

• Simple manual adjustments – no hydraulics required
  All adjustments (swivel angle, wheel height) are made with pins and manual mechanisms – no tractor hydraulics needed.
  Low cost of ownership, easy to maintain, and quick to mount.

• Fast three‑point hitch mounting
  Standard Category 1 or 2 three‑point hitch.
  Mount or detach in minutes – no special tools required.

◆ Scope of Application

1. Gravel road and farm track maintenance – grading, crowning, and filling potholes.

2. Field levelling – smoothing ploughed or disced land before seeding.

3. Drainage ditch cleaning and shaping – angled blade cuts and cleans ditches efficiently.

4. Snow clearing – on private roads, farmyards, car parks, and pavements.

5. Backfilling – trenches, foundation walls, and irrigation pipes (using reversed blade).

6. Arena and paddock levelling – maintaining equestrian arenas and livestock yards.

7. Loose material spreading – spreading gravel, topsoil, or compost over prepared ground.

◆ Technical Performance Parameters